AGREE

This website stores cookies on your computer. These cookies are used to collect information about how you interact with our website and allow us to remember you. We use this information in order to improve and customize your browsing experience and for analytics and metrics about our visitors both on this website and other media. To find out more about the cookies we use, see our Cookie Statement.
If you decline, your information won’t be tracked when you visit this website. A single cookie will be used in your browser to remember your preference not to be tracked. Find out more here.

RT6296F

2A, 17V Current Mode Synchronous Step-Down Converter

RT6296F
New

The RT6296F is a high-efficiency, 2A current mode synchronous step-down DC-DC converter with a wide input voltage range from 4.5V to 17V. The device integrates 100mΩ high-side and 40mΩ low-side MOSFETs to achieve high efficiency conversion. The current mode control architecture supports fast transient response and internal compensation. The RT6296F provides power good pin to be an output voltage ready indicator. A cycle-by-cycle current limit function provides protection against shorted output. The RT6296F provides complete protection functions such as input under-voltage lockout, output under-voltage protection, over-current protection, and thermal shutdown. The PWM frequency is adjustable by the EN/SYNC pin. The RT6296F is available in the TSOT-23-8 (FC) package.

Applications

  • Industrial and Commercial Low Power Systems
  • Computer Peripherals
  • LCD Monitors and TVs
  • Set-top Boxes

Key Spec.

RT6296F
Status Active
Vin (min) (V) 4.5
Vin (max) (V) 17
Number of Outputs 1
Vout (min) (V) 0.807
Output Adj. Method Resistor
Iout (max) (A) 2
Current Limit (typ) (A) 4
Freq (typ) (kHz) 500
Freq (min) (kHz) 200
Freq (max) (kHz) 2000
Ext Sync Yes
Ron_HS (typ) (mOhm) 100
Ron_LS (typ) (mOhm) 40
Iq (typ) (mA) 0.8
Features Current Mode Control;Cycle-by-Cycle Current Limit;Enable Input;External Synchronization;Internal Compensation;OCP;OTP;PSM;Power Good;Stable with Ceramic Capacitor;UVP
Package Type TSOT-28(FC)

Features

  • 4.5V to 17V Input Voltage Range

  • 2A Output Current

  • Internal N-Channel MOSFETs

  • Current Mode Control

  • Fixed Switching Frequency : 500kHz

  • Synchronous to External Clock : 200kHz to 2MHz

  • Cycle-by-Cycle Current Limit

  • Internal Soft-Start Function

  • Power Saving Mode at Light Load

  • Power Good Indicator

  • Input Under-Voltage Lockout

  • Output Under-Voltage Protection

  • Thermal Shutdown

  • RoHS Compliant and Halogen Free

Datasheet

DS6296F-03.pdf

Videos

How to estimate control loop bandwidth from the transient response time?

Datasheet

DS6296F-03.pdf

RT6296FGJ8F
Package Type:TSOT-28(FC)
Sample Buy
Contact us for more information